Paint Correction
Paint Correction - Cut And Polish
Our Correction Process
Full Decontamination Wash
Thorough wash, using chemicals that strip iron fallout, bug guts, tree sap and and waxes and sealants, and full surface clay for contaminants free paint.
Measure And inspect
Under good lighting, we inspect and take paint measurements to see if we are dealing with factory paint or if paint is too thin.
Mask Up
We prep the car for paint correction, Masking up any area’s that need protection.
Test Cut
Test cut before full correction to find the best combo off compounds and pads.
Polish To mirror
After the deeper paint correction is complete we finish the polishing with our special compounds to leave mirror finish.
Protection
Depending your desired protection level, we can seal and protect with ceramic sprays or ceramic coatings.
What Paint Correction CAN Fix
Swirl Marks
Circular lines left by improper washing or automatic car washes.
Oxidation & Fading
Sun-damaged or dull paint.
Water Spots & Mineral Etching
Light spotting can usually be polished out. (Heavier etching may be improved but not always 100%.
Buffer Trails / Holograms
From bad polishing jobs.
Light to Moderate Scratches
lear coat scratches that don’t go past the top layer. (Can often be fully removed or reduced by 90%+.
Glass Polishing
At Aram Detailing Glass Polishing Is Key In Our Correction Process Included In All Packages ( Single, Dual, Multi ) Stages Correction, The Point of It Removing Any Water Spots Or Road Film That Builds up And Having Cristal Clear Glass, Specially In Rain Say Good Bye For Streaky Hazy Glass.
Paint Correction Packages
Single Stage Correction
Perfect for light swirls and minor imperfections. One-step polish to restore shine and clarity to your paint.
Dual Stage Correction
Ideal for moderate scratches and swirls. Two-step process removes defects and refines the finish for exceptional gloss.
Multi Stage Correction
Ultimate correction for heavily damaged paint. Multiple stages of cutting and polishing for showroom-quality results.